COOLANT FILTRATION AND RECYCLING SYSTEMS

EXTEND COOLANT LIFE AND MAXIMIZE PRODUCTIVITY.

Remove particulate and tramp oils from your water-based cutting and grinding fluids to extend fluid and tooling life, improve part quality, and shorten cycle times.

With more than twenty filter options, Trinity can design a solution that meets your exact fluid cleanliness goals.

Contamination Leads to Premature Fluid Breakdown and Diminished Part Quality

Chips and swarf increase friction, reduce fluid cooling rates, shorten tool life and decrease surface finish quality. Tramp oils interfere with coolant emulsions, shorten fluid life and promote bacterial growth and foul odors.

If you’re experiencing any of the following, it’s time to look for a new industrial filtration system:

  • Tramp oil buildup on the reservoir surface

  • Foul-smelling fluids and skin irritation

  • Short coolant life and high fluid disposal costs

  • Chip, fine, and swarf contamination

  • Slow machining speed, poor surface finish, and scrapped parts

  • Increased wear and corrosion on critical tool and workpiece surfaces

Filter Particulate Contamination to Any Required Micron Level

Chips, fines and swarf from the metalworking process are constantly contaminating your coolant. These particulates increase friction, process temperature, and abrasive wear, which shortens tool life and reduces part quality.

Trinity can efficiently remove both large chips and small fines down to one micron—allowing you to achieve any desired cleanliness goal and:

  • Remove chips, fines, grinding, and swarf

  • Extend the life of your soluble, synthetic, and semi-synthetic coolants

  • Extend tool life by reducing abrasive wear

  • Improve cycle times and minimize scrapped parts

  • Save on expensive fluid disposal and replacement costs

Remove Tramp Oils from Machine Tool Coolants

Tramp oils get into your coolant from oily residues on workpieces and from cross-contamination with other lubricants used in the machining process. Tramp oil promotes bacterial growth that creates foul odors and causes dermatitis. The bacteria also degrades coolant emulsifiers and corrosion inhibitors, which increases corrosion to the tool and workpiece and shortens fluid life.

Trinity can help you to:

  • Separate and remove tramp oils from coolant

  • Prevent bacterial growth that causes foul odors and health concerns

  • Extend the life of your soluble, synthetic, and semi-synthetic coolants

  • Maintain acceptable cooling rates to maximize part quality and productivity

Industrial Oil Filters for Machine Tool Coolant Fluid