Trinity Fuel Conditioner
Used For: All Hydrocarbon & Biomass Fuels and Refrigerants
ADVANTAGES
Yields more complete combustion
Increases power production & torque by up to 6%
Increases fuel efficiency 10% or more
Reduces emissions by 10% or more
Increases mileage and range by 5% – 30%
Conditions hydrocarbon & biomass fuels, and refrigerants
No maintenance
Easy installation
Made in USA
CAPACITY & FLOW RATE
Non-interference with normal fuel operation
CHARACTERISTICS
Charged Polarity Source
Magnetic field reduces size of hydrocarbon molecules
Magnetic field aligns hydrocarbon molecules, providing an optimum oxygen & fuel environment for improved combustion
Increases viscosity in refrigerants resulting in better cooling performance and reduced energy consumption
Optimizes fuel efficiency
DIMENSIONS & WEIGHT
4” length x 3” width
Weight: 32 ounces
LIMITATIONS
Install at least 6” away from electronic devices to prevent magnetic interference
Must be installed on non-ferrous fuel lines or loop
MAGFUEL TECHNOLOGY
Better Fuel Burn
Less Contaminants
Reduced Emissions
Better refrigerant cooling
Less energy
TESTIMONIALS
“Bus #63 [diesel engine] – Testing conducted as planned. Trinity Fuel Conditioner installed. Most notably, initial results indicate a 22% reduction in CO, a 27% reduction in NOx, and a 63% reduction in hydrocarbons.”
WJ Consulting, INC. On Site Emissions Testing Gainsville, GA
“The Hummer went from 8 to 11 miles per gallon of fuel after we [Conly Tire and Auto] installed a Trinity Fuel Conditioner.”
Conly Tire & Auto
“Our management used a 40 lb cylinder propane set at 400 degrees to test a burn without the Trinity Fuel Conditioner first. The burn time was 47 min. The same exact conditions, 1 hour later, the Trinity Fuel Conditioner was installed – and WOW – to our surprise we got a burn of 125 minutes... 2.5 times the burn time.”
Cathy Perryman, President Country Caterers Jacksonville, FL
